How to Use the Lilly Mini Brush for Pet Hair Removal
By Ray Allen Manufacturing | Published: 2026-10-24
Category: How-to Guides
Learn step-by-step how to use the Lilly Mini Brush to quickly remove embedded pet hair from furniture, carpets, car seats, and clothing. Safe for all fabrics and reusable.
Quick Answer
Use the Lilly Mini Brush with short, firm strokes in one direction to lift embedded pet hair from fabric, carpet, and upholstery. Its mini-blade design targets short to medium wiry hair without damaging the material.
Why the Lilly Mini Brush Works Differently
Unlike standard lint rollers that rely on adhesive sheets, the Lilly Mini Brush uses a reusable mini-blade edge to grab and lift pet hair that is deeply embedded in fabric fibers. This makes it especially effective for short, wiry pet hair that often resists vacuuming or sticky rollers.
Because it is fabric-safe and does not require disposable sheets, the brush is a cost-effective and eco-friendly alternative for regular pet hair maintenance on couches, pet beds, carpeted stairs, rugs, and vehicle interiors.
Step-by-Step Instructions
- Step 1: Prepare the Surface: Place the fabric or item on a flat, stable surface. If cleaning a couch or car seat, ensure the area is free of large debris or loose dirt. This prevents the brush from pushing debris deeper into the fibers. A quick vacuum or shake before brushing improves results and extends the brush's lifespan.
- Step 2: Hold the Brush at a Slight Angle: Grip the Lilly Mini Brush comfortably and tilt it about 30 degrees so the blade edge contacts the fabric. Apply light to moderate pressure—firm enough to engage the hair but not so hard that you risk damaging delicate fabrics. Common mistake: pressing too hard can push hair deeper. Start gently and increase pressure only if needed.
- Step 3: Brush in One Direction Only: Use short, consistent strokes in a single direction (e.g., away from you). Do not scrub back and forth, as this can tangle hair or push it into the weave. After each stroke, lift the brush to see the collected hair. Brushing in one direction maximizes lift and prevents re-depositing hair onto the fabric.
- Step 4: Remove Collected Hair from the Brush: After a few strokes, the blade will accumulate a clump of pet hair. Simply pinch or wipe it off with your fingers or a dry cloth. The brush is reusable—no adhesive sheets needed. Repeat the process until the surface is clean. Empty the brush frequently to maintain its effectiveness. A full blade loses grip.
- Step 5: Clean the Brush After Use: Rinse the brush under warm water and dry it with a soft cloth. Avoid using harsh chemicals or abrasive pads, which can dull the blade edge. Store it in a dry place away from direct heat. Regular cleaning prevents oil and debris buildup, keeping the blade sharp for future use.
Product Facts
- Lilly Mini Brush: The Lilly Mini Brush Pet Hair Detailer quickly lifts and removes even the most stubborn embedded pet hair from carpets, fabrics, and clothing. Its mini-blade design targets wiry pet hair that’s short to medium in length, making it ideal for cleaning couches, furniture, pet beds, carpeted stairs, rugs, and vehicle interiors.

Lilly Mini Brush
