Set the light up before the dog comes out
Night search work asks a headlamp to do two jobs at once: show you the ground and your dog, and keep your hands free for lead, collar, or radio. The Fenix HM23 is built around that tradeoff. It runs on a single AA battery, tops out at 240 lumens with a 174-foot (53m) reach, and weighs 1.5 ounces, so it sits on your head rather than pulling at your attention.
Do the setup in daylight or under yard lights. Confirm the reflective headband is seated flat, check that the silicone holder grips the light body, and test the side switch through all three levels before you leave. A light that gets sorted out at the trailhead is a light that gets fumbled in the dark.
What the HM23 brings to a night search
- Fenix HM23 Headlamp: 240 lumens maximum output with a 174-foot (53m) beam distance Gives you a realistic sense of how far ahead you can read ground and pick up a dog working out front.

Fenix HM23 Headlamp - Fenix HM23 Headlamp: Three brightness levels controlled by a single side switch Lets you drop to a lower level for close handling and raise output when you need to scan.
- Fenix HM23 Headlamp: Powered by one AA battery (included), with a maximum 100-hour runtime Defines your battery plan: one cell, and a runtime ceiling that depends on the level you use.
- Fenix HM23 Headlamp: IP68 waterproof and dustproof, made from aluminum and silicone, 1.5 ounces Suits wet grass, rain, and dusty ground without adding noticeable weight on a long night.
Running the HM23 through a night search
Treat these as a working sequence, not a manufacturer procedure. The catalog supplies the controls and outputs; how you pace them is your call in the field.
- Start on a low level and let your eyes adjust: The single side switch cycles three levels, so you can begin dim and step up only when the search demands it. Low light preserves your night vision and keeps the beam from flattening the ground ahead.
- Angle the beam where the work is: The 180-degree adjustable beam lets you tip the light down for close handling at the lead or collar, then lift it to scan ahead. Reset the angle after each adjustment so you are not hunting for it later.
- Step up to high only for scanning: At 240 lumens the HM23 reaches roughly 174 feet (53m). Use the top level to check a treeline, field edge, or a dog that has pulled ahead, then come back down.
- Watch for the low-voltage warning: The headlamp signals when the battery needs replacing. Treat that warning as your cue to swap the AA cell rather than pushing through the rest of the night on a fading light.
- Use the reflective headband as a safety layer: The reflective band helps you stay visible to handlers, vehicles, or a search team behind you. It is a visibility aid, not a substitute for a dedicated marking light.
Planning the AA battery around real night length
The HM23's 100-hour maximum runtime is a ceiling, not a promise for every setting, and it is the number to plan against rather than a fixed schedule. Carry at least one spare AA cell in a pocket you can reach without taking the headlamp off, and know that runtime shortens as you move up the brightness levels.
Because the light runs on a common AA, your backup plan is simple: a fresh cell and a spare O-ring from the package. The spare O-ring is worth keeping in your kit rather than a drawer at home, since it is the small part most likely to go missing when you need the light sealed against weather.
Where the HM23 fits and where it does not
- Good fit: hands-free dog handling: One-switch control and a 1.5-ounce body keep your hands on the lead, collar, or radio, which is the core reason to run a headlamp for dog search rather than a handheld.
- Good fit: wet and dusty ground: IP68 waterproofing and dustproofing cover rain, dew, mud, and trail dust, and the aluminum and silicone build suits rough handling.
- Consider a different tool: long, high-output sweeps: If a search demands sustained maximum output for hours, the single AA cell and 240-lumen ceiling will push you toward frequent battery changes. The catalog does not confirm a rechargeable option for this model.
- Consider a different tool: colored or filtered light: The HM23 uses a neutral white Cree LED. The supplied information does not confirm colored filters or a red-light mode, so do not count on it for light discipline beyond dimming the white beam.
Handling details that decide comfort on a long night
The reflective headband is described as comfortable and stay-put, and the silicone holder is what keeps the light body from migrating as you move. Check both before the search starts: a band that sits too high will bounce when you jog after a dog, and a loose holder lets the beam drift off your sightline.
Keep the headlamp clean and dry between outings, and inspect the O-ring seal when you change the battery. The package includes the headlamp, an alkaline AA battery, the reflective headband, the silicone holder, and a spare O-ring, so you have the parts on hand to keep the seal in working order.
One safety note from the catalog: the product carries a California Proposition 65 warning about chemical exposure. Follow the warning information supplied with the product and keep the headlamp out of reach of children when it is not in use.
HM23 at a glance
- Fenix HM23 Headlamp: Cree neutral white LED rated for a 50,000-hour lifespan Neutral white renders ground texture and scent-source areas more naturally than a harsh cool beam.
- Fenix HM23 Headlamp: One-switch control for fast operation, even with cold or gloved hands Cuts the fumbling that costs you sight of the dog during a night search.
- Fenix HM23 Headlamp: Package includes headlamp, alkaline AA battery, reflective headband, silicone holder, and spare O-ring Tells you exactly what is in the box, so you can plan spares before the first night out.

