American Aluminum E/Z Rider Prisoner Transport Setup Guide

What the E/Z Rider Dual-Transport Unit Does

The American Aluminum E/Z Rider 1/3 Prisoner, 2/3 K-9 Transport Unit turns a single patrol vehicle into a dual-purpose transport solution. It allows you to safely carry both a K-9 partner and a detainee in one vehicle without compromising safety or security protocols. The unit is precision-fitted for specific Ford models: the 2020-2026 Ford Police Interceptor Utility (PIU) and the 2021-2026 Ford F-150 patrol truck.

Compatible Vehicles at a Glance

• American Aluminum E/Z Rider 1/3 Prisoner, 2/3 K-9 Transport Unit for 2020-2026 Ford PIU: Engineered specifically for 2020-2026 Ford Police Interceptor Utility models. Ensures seamless integration with your existing patrol vehicle's cabin dimensions.

  

• American Aluminum E/Z Rider 1/3 Prisoner, 2/3 K-9 Transport Unit for 2021-2026 Ford F-150: Specifically engineered for 2021-2026 Ford F-150 models, ensuring perfect integration with your patrol truck's unique cabin dimensions. Avoids fitment issues and guarantees that the insert stays secure during transport.

  

What Comes in the Installation Package

Every E/Z Rider unit includes window guards and door panels for added protection. The prisoner compartment features a lap-style seat belt system for secure containment, and a robust aluminum separation panel with a clear polycarbonate window allows you to monitor the detainee without compromising compartment isolation. The K-9 section includes all the safety innovations found in American Aluminum's dedicated platform units. You can work with your vehicle's existing rear jump seat or upgrade to a custom aluminum prisoner seat for long-term performance.

Installation Steps

These general steps apply to both the Ford PIU and F-150 versions. Always refer to the manufacturer's full instructions for your specific vehicle.

1. 1. Verify vehicle compatibility: Confirm your vehicle is a 2020-2026 Ford PIU or a 2021-2026 Ford F-150. The unit is precision-fitted for these models only.
2. 2. Prepare the rear compartment: Remove any existing seating or equipment that may interfere with the insert. Decide whether to keep the factory rear jump seat or install the optional custom aluminum prisoner seat.
3. 3. Position the E/Z Rider unit: Slide the assembled unit into the rear cabin area. The 1/3 prisoner section should be on one side and the 2/3 K-9 section on the other. Ensure the aluminum divider aligns with the vehicle's floor and seat anchors.
4. 4. Secure the insert: Bolt the unit into the vehicle's existing mounting points (not supplied with the unit). Tighten all fasteners to the manufacturer's torque specifications.
5. 5. Install window guards and door panels: Attach the included window guards and door panels to prevent escape and protect vehicle glass. Confirm they do not obstruct the polycarbonate viewing window.
6. 6. Test the seat belt and divider operation: Verify the lap-style seat belt in the prisoner compartment locks and releases correctly. Check that the divider window is clean and unobstructed for visual monitoring.

Important Safety and Compliance Notes

The prisoner compartment is designed for short-distance transport in accordance with law enforcement operational standards. It is not a long-term holding cell. The K-9 section provides a spacious, comfortable environment, but you should still follow your agency's protocols for canine transport, including proper restraint and ventilation.

Both units carry a Proposition 65 warning for California: this product can expose you to chemicals known to the state to cause cancer and birth defects. If you are in California, review the warning at www.P65Warnings.ca.gov before installation.

Oversize shipping charges apply: $650.00 for delivery in the Continental U.S. Plan your budget accordingly.